Procedures

Using a walk-behind diamond-bit grinder, we grind the entire concrete surface, opening up the pores which allows the base coat to penetrate deep into the concrete. This is why we are confident that our product will not flake and will withstand our 20-year warranty.

Grinding the edges tightly against the walls and corners ensures the coating penetrates, creating a proper bond to the concrete from edge to edge.

Cracks are cut with diamond wheel to clean up the jagged and fragile edges to ensure our filler will bond and have a secure hold on the sides of the crack.

Pitting – Spalling – Chipping
Grinding cleans any holes, broken pitting areas, and loose pieces of concrete. Uncleaned, these areas may compromise the integrity of the filler’s ability to make a permanent patch. (It’s all in the preparation!)

Crack filler material is added and broken and pitting areas are filled and then leveled with the rest of the floor with a final grinding.

The concrete surface is High powered vacuum cleaned to remove all concrete dust from the concrete pores to ensure a penetrating bond of the base coat material.

Taping off work area keeps the job neat and clean.